PSA Pressure Sensitive Adhesive Veneer Edgebanding is produced by joining individual pieces of veneer together into a continuous master roll by finger-jointing the veneer. The rolls are laminated with a fleece, Backed with PSA then sanded and slit to finished widths.
Product is applied by hand and rolled for best adhesion
Finger joints are made by joining the veneer together using a die cut finger layout in the veneer and then gluing them together using joint tape.
To ensure color and grain matching at the finger joint, every other piece of veneer is flipped end to end. The fleece (cellulous membrane) laminated to the back of the veneer provides strength to reduce cracking and breaking. The fleece is also colored to blend with the veneer to reduce any line between the banding and the substrate.Color and grain matching at the finger joint ensured by the production method and selection
Fleece backer provides added strength on automatic non-glued and pre-glued and is colored to blend with veneer and substrate
Stocked in 5/8" thru 2+" wide x 500' rolls Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir (12 species)
Thickness .034" plus or minus .002" based on 0.12 of hot melt
Standard length of continuous veneer roll - 250 lineal feet
Surface finish 180 grit