Prefinished and Preglued Fleece Backed Veneer Edgebanding is produced by joining individual pieces of veneer together into a continuous master roll by finger-jointing the veneer. The rolls are laminated with a fleece, prefinished and then coated with a hot melt adhesive and slit to finished widths.
- Pre-finished FormEdge is produced from A-grade finger jointed veneer selected for color and grain consistency
- A high quality, clear lacquer finish is applied
- The gloss level and finish is designed to match pre-finished hardwood panels Standard finish is "satin" clear coat
- The UV lacquer coating is resistant to heat, staining and scratching
Product can be applied with a Hot Air Edgebanding or Manually applied with an Iron.
Finger joints are made by joining the veneer together using a die cut finger layout in the veneer and then gluing them together using joint tape.
To ensure color and grain matching at the finger joint, every other piece of veneer is flipped end to end. The fleece (cellulous membrane) laminated to the back of the veneer provides strength to reduce cracking and breaking. The fleece is also colored to blend with the veneer to reduce any line between the banding and the substrate.Color and grain matching at the finger joint ensured by the production method and selection
Fleece backer provides added strength on automatic non-glued and pre-glued and is colored to blend with veneer and substrate
Stocked in 5/8" thru 2+" wide x 500' rolls Maple, Cherry, Red Oak, White Birch, Clear Pine, White Oak, Red Alder, White Ash, Mahogany, Hickory, Walnut and Fir (12 species)
Thickness .034" plus or minus .002" based on 0.12 of hot melt
Standard length of continuous veneer roll - 250 lineal feet
Gloss level between 20 and 30 is standard
UV lacquer finish at 1.5 mils in coverage
